Smoothflow transformer

This Minimodels Smoothflow transformer has a generous 2 Amp output

Hornby Smoothflow transformer



Supplied for many early Hornby, Minimodel and Scalextric sets this Minimodels transformer supplies 12 Volts at a current rating of 2 Amps. An overcurrent protection device is fitted too.

Input: 240 Volt A.C.

Output: 12 Volt D.C. 2 Amps.

This Minimodels Smoothflow transformer has been fully tested including the overcurrent protection device and everything is in full working order. The terminal thumbscrews are present.

This particular example is fitted with a UK 13 Amp 3 Pin mains plug.


This Minimodels Smoothflow power supply has been functionally tested with no faults identified and is supplied as presented. Hornby Train Restorations recommends this unit is inspected by a qualified Electrician before use. Hornby Train Restorations accepts no liability for loss or damage caused by this unit.




If you are not sure if this power supply is for your track then please contact us we may be able to help you.
Index of track power and control products